When scientists "split the atom" in the early
20th century, they thought they were revealing how the
world is built from basic bits of matter. What they didn't realize at
the time was that they'd invented a completely new way of producing
energy that would soon be deployed in atomic bombs and
nuclear power plants. Ernest Rutherford,
the scientist who led the early atom-smashing experiments, famously said that
"anyone who expects a source of power from the transformation of the atom is talking moonshine."
In one sense at least, he was correct: though it's widely used in many countries,
nuclear power has proved hugely expensive and politically
controversial, caused some catastrophic accidents, polluted seas, and
generated horrible amounts of highly dangerous radioactive waste.
Today's nuclear power plants release energy by splitting up large
atoms (in what's called nuclear fission); tomorrow's plants
could work using an entirely different form of nuclear power where
small atoms are forced together to make bigger ones. Known as
nuclear fusion, this is much cleaner and safer and could
potentially solve our energy needs forever. What is fusion and
how does it work? Let's take a closer look!
Photo: One way to make nuclear fusion is to confine atoms in a small space and then blast them with laser
beams, as in this experimental setup at the National Ignition Facility (NIF) in California. More about this further down
the article. Photo credit: Lawrence Livermore National Laboratory.
It's not immediately obvious, but almost
everything you're doing right now (from breathing in and out to
tapping away on your computer) and everything you can see around you
(trees blowing, grass growing, and cars speeding by your window) is
powered by nuclear fusion—because that's what drives the Sun, and
the Sun drives the Earth. If you could get close enough to the Sun
to peer inside its core and see what's going on inside, you'd see atoms of
hydrogen joining together ("fusing") to make atoms of helium,
releasing huge amounts of energy in the process. Apart from making
incredible amounts of heat inside the Sun itself (the core is at a
temperature of about 15 million °C or 27 million °F), the Sun's
nuclear fusion also produces the solar energy that streams out across
150 million kilometers (93 million miles) of space sustaining pretty much all the
life we see on Earth.
[1]
Now suppose we could make a machine that copied what happens inside the Sun here on Earth,
only in a much smaller and more controllable way. In theory, we'd just feed in hydrogen (a simple, fairly safe gas we can
make from water) at one end, smash its atoms together inside, and get helium (a clean and safe gas) out of
the other end. In the process, we'd produce huge amounts of heat energy,
which we could use to drive steam turbines
and generators to produce electricity,
much as in any conventional power plant. There'd be no pollution, no carbon dioxide (one of the so-called
greenhouse gases that causes global warming and climate change), and
no deadly nuclear waste. We'd have simple, clean, safe, nuclear
power!
Photo: The Earth is powered by nuclear fusion happening inside the Sun.
Some time in the future, we might be able to create small-scale fusion power ourselves, here on Earth. This photo
was taken by the Solar and Heliospheric Observatory (SOHO), a project of international cooperation
between ESA (European Space Agency) and NASA. Picture courtesy of SOHO/EIT consortium.
Why do we need yet another kind of energy?
We've got lots of different ways of making the energy we need—oil, gas, coal, nuclear, wind, solar, wave, hydro,
waste incineration, and biomass, to name just 10 of them—so why do
we need any more? The answer is that three big problems are going
to hit us hard in the next few decades:
The world's population is still increasing and it's expected to rise from
about 8 billion
today to about 9.8 billion by 2050. Meanwhile, lots of the people in
developing countries who currently use very little energy may well
want to use more in future as their standard of living improves. So
we'll have lots more people on the planet and each one of them, on average, using
more energy than each person does today. It's been
estimated that the world will need 50 percent more energy in 2050 as it did in 2020.
About 80 percent of our energy currently comes from fossil
fuels such as oil, gas, and coal. We have only limited supplies of
these fuels and oil and gas (in particular) are rapidly running out.
[2]
The third problem we have is that fossil fuels make carbon dioxide
gas when we burn them (or use them in engines) to release energy.
That's creating climate change that could ultimately make our planet
impossible to live on.
What's the answer? Renewable energy made from the
Sun, the wind, the oceans, and other sources is one solution to these
problems, but we're not building it quickly enough at the moment to
make enough difference (for example, it takes thousands of wind
turbines to make as much electricity as a single coal-fired power
plant). If we could build nuclear fusion plants that make as much
electricity as today's coal or nuclear fission plants, with none of
their drawbacks, we could potentially solve Earth's energy problems
forever, making all the power we need without wrecking the environment.
Photo: Wind turbines can make clean, green energy, but it takes at least 1000 of them, working at full capacity, to replace a single coal or nuclear power plant. This is a relatively small wind turbine that generates peak power of just 225kW, so you would need about 9000 turbines like this to make as much energy as a large 2GW (2000 megawatt) coal or nuclear plant (assuming
the turbine worked at maximum power all the time, which of course it doesn't). Typical large wind turbines generate 10 times more power than this one.
Sponsored links
How can we make nuclear fusion happen on Earth?
There's obviously a huge difference between the center of the Sun and the inside of a power plant on Earth—so
how could we make nuclear fusion reactions happen in practice?
It turns out that, instead of using ordinary hydrogen atoms, the best approach is
to use other isotopes (different atomic forms) of
hydrogen that are slightly heavier. An ordinary hydrogen atom has
just one proton in the nucleus and one electron in the space around
it, but these heavier hydrogen isotopes are built differently (and
are much less stable as a result). One of them, known as deuterium,
has one proton and one neutron in the nucleus and one electron in the
outside space. The other, called tritium, has one proton and
two neutrons and one electron outside. Smash together an atom of
deuterium and an atom of tritium and the bits we have to play with
are two protons, three neutrons, and two electrons. From these, we
can make one very stable atom of helium (which has two protons, two
neutrons, and two electrons) and have one neutron left over.
By converting two unstable atoms (one each of
deuterium and tritium) into one stable helium atom, we release a
great deal of energy.
Artwork: The nuclear reaction that produces fusion energy. Protons are shown as blue and neutrons as red. (Electrons aren't shown.)
Now what we have here sounds a little bit like a chemical
reaction, where we might react something like sodium metal with
chlorine gas to get sodium chloride (table salt). Chemical reactions
can release energy if the products (the things you end up with)
are more stable than the reactants (the things you start off with).
However, you get much more energy out of a nuclear reaction
(where the atoms you start with are changed into completely different atoms) than a chemical
reaction (where the atoms retain their identity but join or rearrange
into different molecules). That's because the amount of energy needed to
hold the nucleus of one atom together is vastly greater than the amount of energy involved in
binding two different atoms together.
Where does nuclear energy come from?
Atoms are (generally) stable things, so if you want to break one apart you have to use energy to do it.
The energy you need is equal to the energy that holds the thing together in the first place;
and it's called the binding energy. It's the source of the energy we can make by joining
small atoms together or splitting big ones apart. It's where nuclear energy comes from.
Artwork: Nuclear energy is released when small atoms join into
bigger ones (fusion) or bigger ones split into smaller ones (fission).
The nucleus of an atom sticks together for the simple reason that it's more stable than its component parts.
When those parts come together, they release energy. Where does the energy come from?
The mass of a nucleus is less than the mass of the things (protons and neutrons or "nucleons") it's made from.
The difference between the two masses (the mass defect) is equal to the binding energy.
That sounds a bit confusing, but it follows directly from two things.
First, Einstein's idea that mass and energy are equivalent (famously represented by the equation E = mc2). Second, the law of conservation of energy: we can't destroy mass or energy, only change them into other forms. So the "missing mass" accounts
for the energy we gain.
Different nuclei have different numbers of protons and neutrons, which pack together more or less
efficiently, and that means they have different amounts of binding energy. That's why changing one atom into
another one can release energy from the nucleus—nuclear energy, in other words:
In nuclear fission, we split large unstable atoms into smaller, more stable ones and release binding energy.
In nuclear fusion, we join small unstable atoms into larger, more stable atoms, and also release binding energy.
The reason energy is released is different in the two cases. Particles in the nucleus of an atom are affected
by two main forces, the strong nuclear force (attractive and powerful over short distances), which
pulls them together, and the electromagnetic force (repulsive and more powerful over longer distances),
which pushes them apart. Small atoms can make themselves more stable by clumping together into bigger
ones to maximize the benefit of the strong nuclear force. Big atoms can make themselves more stable by splitting into smaller ones to reduce the repulsive electromagnetic force. Fusion happens because of the former; fission because of the latter.
This suggests medium-sized atoms are going to be the most stable—and
that turns out to be true.
Nickel-62 is the most stable (it has the most binding energy per nucleon)
and iron (another medium-sized atom) isn't far behind. That's why iron—very stable—is also
so common on Earth.
How much energy is released in a fusion reaction?
If you compare the mass of a deuterium atom plus a tritium atom (what you start off with) with the mass of a helium atom and a neutron (what you finish with), you'll find some mass is "lost" during a fusion reaction. That's
the mass that's converted into energy as the nuclei fuse together; the amount of
energy is precisely related to the amount of mass by Einstein's famous equation
E=mc2, which shows that a tiny amount of mass can produce a huge
amount of energy (because c, the speed of light, is a very large number and c squared, which is c×c is even bigger).
The amount of energy released in one single reaction is 17.59 MeV (17.59 million electron volts), which is
one of those baffling measurements only physicists use and understand.
[3]
Translating that into more meaningful terms, you'd need about 3,500,000,000,000 (3.5 million million) of those reactions
happening every single second to light a 10-watt, low-energy lamp.
That sounds a lot, but remember that 1g (0.04 oz) of ordinary, pure hydrogen contains 600,000,000,000,000,000,000,000
(600,000 million million million) atoms and you can see we could potentially make a huge amount of fusion power with very little fuel at all.
[4]
(The figures are slightly different if we take account of deuterium and tritium, but the basic point—a small amount of matter contains an awful lot of atoms—still holds.)
Artwork: Energy being released in a nuclear fusion reaction (conceptual illustration).
Artwork by US Department of Energy courtesy of
Wikimedia Commons.
How would nuclear fusion plants work in practice?
As we've just discovered, the basis of nuclear fusion on Earth is converting deuterium and tritium to helium, with a big release of
power as two unstable atoms rearrange themselves to make one stable
atom. It sounds simple enough, but no-one has yet managed to make fusion
work on a big enough scale to generate commercial amounts of power.
That's because there are huge practical difficulties involved. To make two
atoms fuse, you have to push their nuclei closer and closer together. The trouble is,
the nucleus of every atom has a relatively large positive, electrical
charge so two nuclei repel one another in much the same way as the
north poles of two magnets ("like poles repel"). The nearer the
nuclei get, the more energy it takes to get them any closer—and the
amount of energy keeps on increasing. In fact, the repulsive
force between two nuclei quadruples every time you halve the distance
(if you're interested, that's because of
Coulomb's Law). In
practice, this means you have to use a vast amount of energy to make
atoms fuse together in the hope that you can release even more energy in the end.
After decades of trying, scientists have only just got to the point where they can
release more energy from fusion as they use in the first place.
That's why nuclear fusion is currently being studied only in scientific laboratories
and why, for the moment at least, it's not a practical or viable source of power.
Confinement
What are scientists actually doing in those fusion labs? To make atoms fuse, we have to heat them up to
make plasmas (ultra-hot soups of gases in which the atoms get so
hot that they're blown apart into their constituent nuclei and electrons), then
hold them tightly together in a confined space at temperatures at
least as hot as you get in the center of the Sun. So the problem of
generating energy by fusion becomes a slightly different one: how can
we confine a super-hot plasma so it stays hot and energetic enough for
the atoms inside it to overcome their natural repulsion and fuse together?
Artwork: Magnetic confinement: In a tokamak, plasma (gray) is confined in a donut shape
by electromagnet coils (orange and black).
In stars like the Sun,
gravity is the force that
achieves this. On Earth, we have to achieve the same end
artificially and there are two basic ways to do this. In one method,
called magnetic confinement, deuterium and tritium are heated
to sun-core temperatures of about 100 million degrees. Then a
super-strong magnetic field is used to trap them in a donut-shape
known as a torus. A machine that does this is known as
a tokamak, a word coined in Russia for
just this piece of apparatus (the biggest in the world is currently operating at a lab known
as JET, Joint European Torus, a few km/miles south of Oxford in England). The
other method of fusion is called inertial confinement and
involves firing a powerful laser at a pellet of fuel so the atoms
inside it are instantly heated and fused together. The fuel burns
before it can blow apart, so its own mass (and therefore inertia) is
effectively what confines it. One example of this technique is being
used at NIF (National Ignition Facility) at Lawrence Berkeley
National Laboratory in California, where 192 laser beams
(collectively making the world's biggest laser) are fired
simultaneously at a tiny fuel pellet to create the right conditions
for nuclear fusion.
Artwork: Inertial confinement: Multiple lasers (blue) converge on a fuel pellet (gray) to bring about fusion.
Impressive though they are, JET and NIF are still just lab experiments. Hopes of achieving
anything like commercially viable fusion are also being
pinned on another international project known as ITER, currently under
construction in southern France. Once complete, in around 2025, it should
be able to generate about 10 times more energy than it consumes for
up to about 8–10 minutes. Even that, which will be a major
achievement, will be far short of generating fusion power hour after
hour, day after day, and year after year. But it's a start!
Meanwhile, at MIT, scientists are hoping that "recent" breakthroughs in developing high-temperature
superconductors could help to produce far stronger magnetic fields, so making fusion reactors more immediately feasible. Their project, run by MIT's Plasma Science and Fusion Center (PSFC) and a spinoff company called Commonwealth Fusion Systems (CFS), is called SPARC
and, although less ambitious than ITER, it could potentially deliver results far faster.
In September 2020, in a major boost for the project, 47 key researchers from 12 academic institutions who reviewed the project
concluded that SPARC too would able to generate more energy than it consumed.
But NIF reached that important milestone first, announcing the result in December 2022, so for now it's
ahead of the pack.
Who will win the fusion race—JET, NIF, ITER, SPARC, or someone else altogether? It's far too early to say, but stay tuned as the race continues!
Can fusion ever deliver?
Nuclear fusion offers great promise for the future: huge
supplies of clean energy made from readily available fuels that are
effectively unlimited. It generates no nuclear waste or pollution
(other than reactor equipment, which remains contaminated at the end
of its life for about a century) and no greenhouse gases. There's no risk of nuclear accidents similar to
those that have occurred with fission plants (in horrific incidents such as
at Chernobyl, Ukraine in 1986 and
Fukushima, Japan in 2011). On the negative side,
scientists estimate we're still several decades away from seeing
commercial fusion plants. It's only a matter of time before fusion plants are making some of our daily electricity,
but can we develop them fast enough before Earth's energy crisis, and climate change, really hit home?
A brief history of nuclear fusion
1890s–1920s: New-Zealand-born Sir Ernest Rutherford (1871–1937) and associates demonstrate nuclear fission
("splitting the atom") and nuclear fusion in a long series of ingenious physics experiments, which gradually reveal the structure of the atomic nucleus.
1920: Sir Arthur Eddington (1882–1944), a British physicist, proposes that stars like the Sun make their energy from fusion. Atomic scientist Hans Bethe (1906–2005) fleshes out these ideas in 1939.
1934: Working with Rutherford at Cambridge University, Australian-born Sir Mark Oliphant (1901–2000) becomes the first person to demonstrate nuclear fusion in a laboratory.
1950: Soviet nuclear physicist Andrei Sakarov (1921–1989) designs a special reactor for creating fusion, the tokamak, so beginning the USSR's fusion program. The first Tokamak, the T-1, is created in 1958.
1951: American Lyman Spitzer (1914–1997) invents an alternative plasma-confinement reactor called a
stellarator.
1983: The Joint European Torus (JET) tokamak reactor in England is completed. In 1997, it sets a world record for fusion generation of 16 megawatts (albeit from an input power of 24 megawatts).
1997: Work begins on the National Ignition Facility (NIF) fusion experiment at Lawrence Livermore National Laboratory in California.
2018: MIT scientists predict that fusion power could be delivering electricity to the world's power grids within 15 years. They launch the SPARC project to realize that goal.
2022: NIF scientists announce that their giant laser experiment has finally produced more energy than it consumes—a milestone that heralds commercially viable nuclear fusion plants in the years to come.
Sponsored links
Find out more
On this website
You might like these other articles on our site covering similar topics:
SPARC: The MIT and CFS project aims to produce commercially viable fusion with the help of cutting-edge superconductors.
Books
Popular
The Boy Who Played with Fusion by Tom Clynes. Eamon Dolan/Houghton Mifflin Harcourt, 2015. How a gifted young student attempted to crack the world's biggest energy challenge.
A Piece of the Sun: The Quest for Fusion Energy by Daniel Clery. Overlook Press, 2014/Duckworth, 2013. Light on science, but a comprehensive review of how engineers have pursued the dream of nuclear fusion.
Fusion: The Search for Endless Energy by Robin Herman. Cambridge University Press, 1990. An entertaining history of fusion research, from Lyman Spitzer's secret Princeton experiments, which launched Project Matterhorn in 1951, to the Fleischmann–Pons, cold fusion fiasco of 1989. Unfortunately, since the book was published in 1990, it omits everything that's happened since then.
The Fusion Quest by T. Kenneth Fowler. Johns Hopkins University Press, 1997. A historic, inside account of the quest for fusion from a former nuclear researcher at ORNL and LLNL.
Academic
Fusion: The Energy of the Universe by G. M. McCracken and Peter E. Stott. Academic Press, 2012. A great introduction that starts with the basic concepts of fusion in the Sun and stars and energy from mass, examines man-made fusion, then reviews different approaches to fusion on Earth, including magnetic and inertial confinement.
General Fusion Takes Aim at Practical Fusion Power by Prachi Patel. IEEE Spectrum, August 13, 2021. A new demonstration reactor is taking aim at viable fusion by 2025 using Magnetized Target Fusion (MTF).
Try This at Home! Fusion in the Basement by Tom Clynes. IEEE Spectrum, February 20, 2020. How Microsoft's Carl Greninger is teaching kids about nuclear fusion in Seattle.
5 Big Ideas for Making Fusion Power a Reality by Tom Clynes. IEEE Spectrum, January 28, 2020. A great comparison of five promising approaches that could deliver commercial fusion power.
Nuclear fusion on brink of being realised, say MIT scientists by Hannah Devlin. The Guardian, March 9, 2018. MIT and Commonwealth Fusion Systems believe they can deliver fusion power to the grid within 15 years with a new technique that uses more powerful magnets.
Startup: LPPFusion Embraces Instability by Mark Anderson. IEEE Spectrum, September 22, 2017. Exploring a new approach to fusion called Dense Plasma Focus (DPF).
Three Alternative Fusion Projects That Are Making Progress by Mark Anderson. IEEE Spectrum, November 18, 2015. Giant, big-budget tokamaks aren't the only hope for achieving nuclear fusion; small-scale research efforts are approaching the problem from different directions.
Start-Ups Take On Challenge of Nuclear Fusion by Dino Grandoni. The New York Times, October 25, 2015. Can energetic startups find the holy grail of fusion where governments and universities have so far failed?
How Far Can Crowd-funded Nuclear Fusion Go? by Mark Anderson. IEEE Spectrum, July 15, 2014. Why Focus Fusion is exploring a process called proton-boron fusion, long abandoned by mainstream researchers.
↑ According to the BP Statistical Review of World Energy 2022, p.3: "Fossil fuels accounted for 82% of primary energy use last year, down from 83% in 2019 and 85% five years ago."
↑ An electron volt is the amount of energy an electron gains when it's accelerated through a voltage of 1 volt. It's a great unit for quantifying energy at the atomic scale,
but pretty meaningless for the (relatively) massive amounts of energy we use in everyday life.
If you have a 10-watt low-energy lamp and use it for one second, it uses 10 joules of energy,
which is the same as 62,415,093,432,601,790,000 electron volts! Now you see why we don't use
"electron volts" for electricity bills.
↑ 1g of hydrogen is 1 mole of hydrogen
and 1 mole of anything contains 6 × 1023 atoms.
Please do NOT copy our articles onto blogs and other websites
Articles from this website are registered at the US Copyright Office. Copying or otherwise using registered works without permission, removing this or other copyright notices, and/or infringing related rights could make you liable to severe civil or criminal penalties.
