You are here: Home page > Energy > OTEC

NASA map showing variation in ocean temperatures.

OTEC (ocean thermal energy conversion)

Earth? It might be better called Oceanus: most of it is, after all, covered in water—much of it very warm water. The really interesting thing about the ocean is not how hot it is, but the difference in temperature between the surface (where the Sun keeps the sea relatively hot) and the depths (where the water, never warmed by the Sun, is considerably cooler). As any engineer knows, a temperature difference like this is very useful indeed if you're trying to make power. So why not use the heat in Earth's vast oceans to generate useful energy? That's the basic thinking behind OTEC (ocean thermal energy conversion), first suggested in 1881, which involves extracting useful energy from the heat locked in the oceans. How much energy are we talking about? According to some estimates, there's enough heat in the upper layers of the oceans to meet humankind's energy needs hundreds of times over. [1] Sounds great! So... how exactly does it work? Let's take a closer look!

Photo: There's a huge amount of energy trapped in the oceans. OTEC (ocean thermal energy conversion) makes power using the temperature difference between warm surface water and cooler water down below. Photo courtesy of NASA/JPL.

Sponsored links

Contents

  1. What is OTEC?
  2. How does OTEC work?
  3. How closed-cycle OTEC works
  4. Advantages and disadvantages
  5. How far off is OTEC?
  6. Who invented OTEC?
  7. Find out more

What is OTEC?

The concept of OTEC: using temperature differences in the ocean to make electric power.

Artwork: The concept of OTEC: could we really use heat differences in the ocean (left) to make electric power for things like laptops and kettles?

Most of the electricity we use comes from heat engines of one kind or another.

A heat engine is a machine that cycles between two different temperatures, one hot and one cold, usually extracting heat energy from a fuel of some kind. In a steam engine or a steam turbine, for example, coal heats water to make hot, high-pressure steam, which is then allowed to expand and cool down to a lower temperature and pressure, pushing a piston and turning a wheel as it does so. The greater the temperature difference between the hot steam and the cooled water vapor it becomes, the more energy can be extracted (and the more efficient the engine).

NASA map of ocean temperatures

Artwork: Temperature gradients: As you can see from this NASA map of ocean temperatures, there are huge variations in ocean temperature between warm tropical areas (red, orange, and yellow) and colder polar and temperate regions (green and blue). What you can't see from this map is the variations in temperature that exist at different depths of the ocean in the same region. The tropics (the area colored orange and yellow) have the best potential for generating OTEC power. Image by NASA MODIS Ocean Group, Goddard Space Flight Center, and the University of Miami courtesy of NASA Goddard Space Flight Center (NASA-GSFC) and Internet Archive.

In OTEC, we use the temperature difference between the hot surface of the ocean and the cooler, deeper layers beneath to drive a heat engine in a broadly similar way—except that no fuel is burned: we don't need to create a difference in temperature by burning fuel because a temperature gradient exists in the oceans naturally! Since the temperature difference is all-important, we need the biggest vertical, temperature gradient we can possibly find (at least 20° and ideally more like 30–40°). In practice, that means a place where the surface waters are as hot as we can find and the deep waters (perhaps 500–1000m or 1000–3000ft beneath ) are as cold as possible. The best place to find such a combination is in the tropics (between the latitudes of about 20°N and 20°S).

Chart showing how ocean temperatures vary with depth from the warm surface, through the thermocline, to the cold depths.

Chart: How ocean temperature various with depth. In the warmest, tropical parts of the world's oceans, surface temperatures are typically 20°C (68°F) or more. In the coldest depths, they're close to freezing (around 4°C or 39°F). This huge temperature difference makes OTEC possible. Water temperature changes rapidly with depth in the middle region, which is known as the thermocline.

How much power could OTEC make?

“... tropical seas absorb an amount of solar radiation equal in heat content to about 250 billion barrels of oil.”

NREL

Considering how big and deep the oceans are, it comes as no surprise to find they soak up and retain vast amounts of solar energy. Some years ago ocean engineer Richard Seymour estimated that the oceans and atmosphere between them "intercept... about 80 trillion kW, or about one thousand times as much energy as used... globally." [2] How much of that could we recover from the sea? According to the US Department of Energy's National Renewable Energy Laboratory (DOE/NREL), on a typical day, the tropical oceans mop up heat energy equivalent to 250 billion barrels of oil. Converting a mere 0.005 percent of this into electricity would be enough to power the whole of the United States! However, impressive-sounding estimates like this don't take account of the tremendous practical difficulties involved in harvesting ocean energy.

Sponsored links

How does OTEC work?

There are essentially two different kinds of OTEC plant, known as closed cycle and open cycle.

Closed cycle

In closed-cycle OTEC, there is a long, closed loop of pipeline filled with a fluid such as ammonia, which has a very low-boiling point (−33°C or 28°F). (Other fluids, including propane and various low-boiling refrigerant chemicals, have also been successfully used for transporting heat in OTEC plants.) The ammonia never leaves the pipe: it simply cycles around the loop again and again, picking up heat from the ocean, giving it up to the OTEC power plant, and returning as a cooled fluid to collect some more.

How does it work? First, the pipe flows through a heat exchanger fixed in the hot surface waters of the ocean, which makes the ammonia boil and vaporize. The heated ammonia vapor expands and blows through a turbine, which extracts some of its energy, driving a generator to produce electricity. Once the ammonia has expanded, it passes through a second heat exchanger, where cool water pumped up from the ocean depths condenses it back to a liquid so it can be recycled. You can think of the ammonia working in a broadly similar way to the coolant in a refrigerator, which is also designed to pick up heat from one place (the chiller cabinet) and carry it elsewhere (the room outside) using a closed-loop cycle. In OTEC, the ammonia picks up heat from the hot, surface ocean waters (just as the coolant chemical picks up heat from the chiller compartment), carries it to a turbine where much of its energy is extracted, and is then condensed back to a liquid so it can run round the loop for more heat (just as the coolant in a refrigerator is compressed and cooled in the fins around the back of the machine).

How closed-cycle OTEC works

Here's a summary of the key steps in a closed OTEC cycle:

Labeled diagram showing the main features of a closed cycle OTEC system

  1. Ammonia (or another low-boiling, heat-transport fluid) flows around a closed loop at the heart of the system. That's the white square in the center of this illustration.
  2. Hot water enters a completely separate pipe near the surface of the ocean and is piped toward the central loop containing the ammonia.
  3. The hot water and the ammonia flow past one another in a heat exchanger, so the hot water gives up some of its energy to the ammonia, making it boil and vaporize.
  4. The vaporized ammonia flows through a turbine, making it spin.
  5. The turbine spins a generator, converting the energy to electricity.
  6. The electricity is carried ashore by a cable.
  7. Having left the turbine, the ammonia has given up much of its energy, but needs to be cooled fully for reuse. If the ammonia weren't cooled in this way, it wouldn't be able to pick up as much heat next time around.
  8. How is the ammonia cooled? In a third pipe, cold water is pumped up from the ocean depths.
  9. The cold water and ammonia meet in a second heat exchanger, which cools the ammonia back down to its original temperature ready to pass around the cycle again.
  10. The cold water from the ocean depths, now slightly warmed, escapes into the ocean (or it can be used for refrigeration or air conditioning).
  11. The hot water from the ocean surface, slightly cooled, drains back into the upper ocean.

Open cycle

In open-cycle OTEC, the sea water is itself used to generate heat without any kind of intermediate fluid. At the surface of the ocean, hot sea water is turned to steam by reducing its pressure (remember that a liquid can be made to change state, into a gas, either by increasing its temperature or reducing its pressure). The steam drives a turbine and generates electricity (as in closed-cycle OTEC), before being condensed back to water using cold water piped up from the ocean depths.

A labeled model of an open-cycle OTEC system by NREL

Photo: A model of a simple open-cycle OTEC system. The heart of it is a large turbine driven by steam, which is cooled by water pumped up from the deep ocean. Photo by Warren Gretz courtesy of US DOE/NREL.

One of the very interesting byproducts of this method is that heating and condensing sea water removes its salt and other impurities, so the water that leaves the OTEC plant is pure and salt-free. That means open-cycle OTEC plants can double-up as desalination plants, purifying water either for drinking supplies or for irrigating crops. That's a very useful added benefit in hot, tropical countries that may be short of freshwater.

Land- and sea-based OTEC

Open- and closed-cycle OTEC can operate either on the shore (land-based) or out at sea (sometimes known as floating or grazing). Both have advantages and disadvantages, which we'll consider in a moment. Land-based OTEC plants are constructed on the shoreline with four large hot and cold pipelines dipping down into the sea: a hot water input, a hot water output, a cold-water input, and a cold-water output. Unfortunately, shoreline construction makes them more susceptible to problems like coastal erosion and damage from hurricanes and other storms.

OTEC system in Hawaii by NREL

Photo: A prototype land-based OTEC plant in Hawaii, photographed in the early 1990s. Photo by Warren Gretz courtesy of US DOE/NREL.

Sea-based OTEC plants are essentially the same but have to be constructed on some sort of tethered, floating platform, not unlike a floating oil platform, with the four pipes running down into the sea; early prototypes were run from converted oil tankers and barges. They also need a cable running back to land to send the electrical power they generate ashore. Hybrid forms of OTEC are also possible. So, for example, you could build an OTEC platform some distance offshore on the continental shelf, which would share some of the advantages of land-based OTEC (stability and durability, closeness to the shore, and so on) and floating OTEC (opportunity to exploit a greater temperature gradient, so generating power more efficiently).

Sponsored links

Advantages and disadvantages

Advantages

OTEC sounds immensely attractive: it's clean, green renewable energy that doesn't involve burning fossil fuels, producing large amounts of greenhouse gases, or releasing toxic air pollution. By helping to reduce our dependence on fuels such as petroleum, OTEC could also help to reduce the "collateral" damage the world suffers from an oil-dependent economy—including wars fought over oil and water pollution from tanker spills. It could also provide a very useful source of power for tropical island states that lack their own energy resources, effectively making them self-sufficient. As we've already considered, open-cycle OTEC can play a useful part in providing pure, usable water from ocean water. OTEC can also be used to produce fuels such as hydrogen; the electricity it generates can be used to power an electrolysis plant that would split seawater into hydrogen and oxygen, which could be bottled or piped ashore and then used to power such things as fuel cells in electric cars. The waste cooling water used by an OTEC plant can also be used for aquaculture (growing fish and other marine food such as algae under controlled conditions), refrigeration, and air conditioning.

Disadvantages

The biggest problem with OTEC is that it's relatively inefficient. The laws of physics (in this case, the Carnot cycle) say that any practical heat engine must operate at less than 100 percent efficiency; most operate well below—and OTEC plants, which use a relatively small temperature difference between their hot and cold fluids, have among the lowest efficiency of all: typically just a few percent. [3] Taken by itself, low efficiency doesn't matter too much because the energy in ocean water is completely free: if we capture only a small proportion of what's there, it's not a huge problem.

However, low efficiency does have other consequences. OTEC plants have to work very hard (pump huge amounts of water) to produce even modest amounts of electricity, which brings two problems. [4] First, it means a significant amount of the electricity generated (typically about a third) has to be used for operating the system (pumping the water in and out). Second, it implies that OTEC plants have to be constructed on a relatively large scale, which makes them expensive investments. Large-scale onshore OTEC plants could have a considerable environmental impact on shorelines, which are often home to fragile, already threatened ecosystems such as mangroves and coral reefs.

Looking from sea to land at the Natural Energy Laboratory in Keahole Point, Hawaii.

Photo: Onshore OTEC plants can take up a lot of valuable coastal land. This is the Natural Energy Laboratory at Keahole Point, Hawaii. Photo by Warren Gretz courtesy of US DOE/NREL.

Although OTEC plants are only suitable for tropical seas with relatively large temperature gradients, that's less of a problem than it sounds. According to DOE/NREL, OTEC could theoretically operate in 29 different sovereign territories (including warmer, southern parts of the United States) and 66 developing nations; and temperate parts of the world that can't operate OTEC most likely have alternative forms of ocean power they could exploit, including offshore wind turbines, tidal barrages, and wave power.

Although OTEC produces no chemical pollution, it does involve a human intervention in the temperature balance of the sea, which could have localized environmental impacts that would need to be assessed. One important (and often overlooked) impact of OTEC is that pumping cold water from the deep ocean to the surfaces releases carbon dioxide, the greenhouse gas currently most responsible for global warming. The amount released is only a fraction (perhaps 10 percent) as much as that produced by a fossil-fueled power plant, however. [5]

How far off is OTEC?

Scientists and engineers have been trying to extract useful heat energy from the oceans for over a century, with varying amounts of success. So far, only a few small-scale experimental units are operating. One is producing about 100kW of electricity (about 5–10 percent as much as a single 1–2MW wind turbine) in Japan, another is generating about half as much in Hawaii, and a third is now producing about 1MW in India; these are tiny amounts of energy that don't prove the long-term commercial viability of OTEC in a world where there are many other sources of power, other forms of renewable energy (such as wind and solar) are becoming dramatically cheaper, and the economics of energy have to be rewritten from one day to the next.

All that could be about to change, however. After years of planning and construction, the Lockheed Martin company finally finished work on its 100kW prototype OTEC plant in Hawaii in August 2015; work began on the Global Ocean reSource and Energy Association Institute's equally tiny 100kW OTEC demonstration facility in Kumejima, Okinawa in 2013. Depending on how successful these modest experiments prove to be, bigger plants could follow; Lockheed has already announced plans for a 10MW offshore plant (with 100 times more generating capacity) in China, while KRISO (the Korean Research Institute of Ships and Ocean Engineering) has been developing a 1MW OTEC unit for the Pacific island of Kiribati since 2013. Under current economic conditions, OTEC plants are most likely to be constructed in or near small tropical islands like this that have little or no energy resources of their own, a high-dependence on expensive, imported oil, and perhaps a pressing shortage of freshwater as well; a combined OTEC power and desalination plant could be very attractive in that situation. Early customers are likely to include power-hungry US naval bases in tropical American territories—and that's one of the reasons why the US Navy is currently investing in the technology.

All this sounds very exciting, but OTEC is still, essentially, a prototype technology that's harder to perfect in practice than to conceive in theory. In 2018, for example, amibitious plans to construct a 16MW offshore OTEC plant in Martinique were shelved indefinitely following major technical difficulties with the coldwater inlet pipe. Barbados and Puerto Rico are among the other nations still actively investigating OTEC as a future power source.

Who invented OTEC?

Here's a brief timeline of some key moments in the history of ocean thermal energy.

Sponsored links

Don't want to read our articles? Try listening instead

If you'd rather listen to our articles than read them, please subscribe to our new podcast on Apple Podcasts, Spotify, Audible, Amazon, Podchaser, or your favorite podcast app, or listen below:

Find out more

On this website

On other websites

Books

Articles

Popular science and news

Technical and academic

Videos

Patents

Notes and references

  1.     The US EPA has a handy chart showing that the heat content in the top 700m of the world's oceans is currently about 2 × 1023 joules. According to the BP Statistical Review of World Energy, 2022, annual world energy consumption is nearly 600 exajoules (6 × 1020 joules). So if we could recover all that energy (and, of course, we can't), we could power Earth for over 300 years.
  2.     See Ocean Energy Recovery: The State of the Art by Richard J. Seymour (ed), p.1.
  3.     Aldo Vieira da Rosa's book, Fundamentals of Renewable Energy Processes, (p.147) suggests his calculated 2.65 percent is typical. A 1986 report by Edward Myers et al The Potential Impact of Ocean Thermal Energy Conversion (OTEC) Operation on Fisheries (p.7) confirms that "most OTEC plants are expected to be in the 2–3% range."
  4.     How much water is involved? Aldo Vieira da Rosa (ibid., p.146) gives an example of a Lockheed OTEC system that could fill a 25m × 12m competition swimming pool in less than two seconds.
  5.     "... the rate of short-term CO2 release from future open-cycle OTEC plants is projected to be 15 to 25 times smaller than that from fossil-fueled electric power plants" according to [PDF] Carbon Dioxide Release from OTEC Cycles by Herbert J. Green et al, International Conference on Ocean Energy Recovery, Honolulu, Hawaii, November 28–30, Sept 1990.

Please do NOT copy our articles onto blogs and other websites

Articles from this website are registered at the US Copyright Office. Copying or otherwise using registered works without permission, removing this or other copyright notices, and/or infringing related rights could make you liable to severe civil or criminal penalties.

Text copyright © Chris Woodford 2012, 2023. All rights reserved. Full copyright notice and terms of use.

Follow us

Rate this page

Please rate or give feedback on this page and I will make a donation to WaterAid.

Tell your friends

If you've enjoyed this website, please kindly tell your friends about us on your favorite social sites.

Press CTRL + D to bookmark this page for later, or email the link to a friend.

Cite this page

Woodford, Chris. (2012/2023) OTEC (ocean thermal energy conversion). Retrieved from https://www.explainthatstuff.com/how-otec-works.html. [Accessed (Insert date here)]

Can't find what you want? Search our site below

More to explore on our website...

Back to top